...

PLA natural pro 1.75 mm

80.0

PLA PRO1.75 Natural

Very easy to print material, 10 degrees more durable and stronger than regular PLA.

100% Warranty – If the material is not working properly full credit.
Suitable for a variety of printers, our spool is made of plastic so it is suitable for AMS or printers with several heads.
Owners of Bambulab, ARCO or K2 Plus are advised to purchase only rolls with a plastic spool suitable for AMS

Out of stock

Delivery up to 3 business days (to most areas)
Delivery up to 5 business days:
(Moshavim, kibbutzim, triangle, beyond the green line Golan Heights, Eilat and East Jerusalem)
Receiving an SMS on the day of delivery + a call before arrival

Description

Natural PLA

PLA PRO type in general natural color is a bit stronger than other PLA PRO in other shades.

This property is positive when mechanical strength is required, but it is a bit more difficult to disassemble supports (easier than PETG but harder than PLA PRO).

Natural PLA – the shade is white and a bit transparent, if it is necessary to see through it, thin walls are recommended.

Polylactic Acid

Easy to print material, easy to model (product finish), hard, not resistant to external conditions (only with sufficiently thick finishing materials), the material is most common for printing because of its ease of printing and price.
Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work.
PLA is a hard but fragile material.
In outdoor conditions, the corners sometimes warp (depending on the thickness and heat).

The additives in PLA PRO or PLA + or Tough PLA are the same, contains additives so that it is 10 degrees more durable and 30% stronger than regular PLA.

As PLA that is more natural or pure and less synthetic is less strong, it can be good for the environment but not in terms of strength.

For the complete guide to all the raw materials click here

Natural PLA printing temperature
195-220 degrees to the top of the printer (Diza)
Work surface temperature – 60 degrees.
Nozzle working temperature: 210 degrees, when the nozzle is not steel (less good thermal conductivity) if 10 degrees higher.
In a very large product (about 100 hours of printing) it is recommended to add glue and lower the bed heat
Fans: 100%

To our Facebook page

good to know

› Rolls or Resin

Half a year from the opening date

› Printers

One-year warranty in our laboratory, excluding consumables.

› Delivery up to 3 business days (to most areas)
› Delivery up to 5 business days:
(Moshavim, kibbutzim, triangle, beyond the green line Golan Heights, Eilat and East Jerusalem)
› Receiving an SMS on the day of delivery + a call before arrival