Gray PLA 10 kg 1.75 mm – Gray

Gray PLA 10 kg 1.75 mm – Gray

Gray PLA 10 kg material easy to print, easy to model (product finish), hard, not resistant to outdoor conditions (only with thick enough finishing materials), the material is most common for printing because of its ease of printing and its price.
Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work.
PLA is a hard but fragile material.
In outdoor conditions, the corners sometimes warp (depending on the thickness and heat).

For the complete guide to all the raw materials click here

Printing temperature PLA gray 10 kg

195-220 degrees to the top of the printer (Diza)
Work surface temperature – 60 degrees.
Nozzle working temperature: 210 degrees, when the nozzle is not steel (less good thermal conductivity) if 10 degrees higher.
In a very large product (about 100 hours of printing) it is recommended to add glue and lower the bed heat
Fans: 100%

To our Facebook page