Pro white PLA with a diameter of 1.75 mm

PLA White Pro is a material that is easy to print, easy to model (product finish), rigid, not resistant to outdoor conditions (only with sufficiently thick finishing materials), the material is most common for printing because of its ease of printing and its price.
Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work.
PLA is a hard but fragile material.
In outdoor conditions, the corners sometimes warp (depending on the thickness and heat).

The additives in PLA PRO or PLA + or Tough PLA are the same, contains additives so that it is 10 degrees more durable and less brittle than normal PLA.

As PLA that is more natural or pure and less synthetic is less strong, it can be good for the environment but not in terms of strength.

White PLA is used a lot for lithofine (3D images) to watch the video how to make …

For full specifications of PLA PRO material click here…

For the complete guide to all the raw materials click here

White PLA printing temperature:

195-220 degrees to the top of the printer (Diza)
Work surface temperature – 60 degrees.
Nozzle working temperature: 210 degrees, when the nozzle is not steel (less good thermal conductivity) if 10 degrees higher.
In a very large product (about 100 hours of printing) it is recommended to add glue and lower the bed heat
Fans: 100%
If stock runs out, you can order ESUN white PLA+ (similar settings and features)

To our Facebook page