PLA Gray Pro 1.75mm

PLA PRO type, gray PLA shade is often used for modeling since it is easy to see the stripes.

The shade of gray is relatively dark.

The diameter of the wire is 1.75 mm, weight 1 kg.

Easy to print material, easy to model (product finish), hard, not resistant to external conditions (only with sufficiently thick finishing materials), the material is most common for printing because of its ease of printing and price. Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work. PLA is a hard but fragile material. In outdoor conditions, the corners sometimes warp (depending on the thickness and heat).

The additives in PLA PRO or PLA + or Tough PLA are the same, contains additives so that it is 10 degrees more durable and 30% stronger than regular PLA.

As PLA that is more natural or pure and less synthetic is less strong, it can be good for the environment but not in terms of strength.

For the complete guide to all the raw materials click here

Gray PLA printing temperature 195-220 degrees for the printer head (nozzle) working surface temperature – 60 degrees. Nozzle working temperature: 210 degrees, when the nozzle is not steel (less good thermal conductivity) if 10 degrees higher. For a very large product (about 100 hours of printing) it is recommended to add glue and lower the temperature of the bed. Fans: 100%

In fast printers like Ambulab the temperature is 220.

To our Facebook page

For the largest Facebook community in Israel in the field of 3D under our management, click here…