Phrozen TR300 Gray

Phrozen TR300 Gray resin high temp Resin – Frozen

Frozen TR300 from the company comes in a 1 liter package.

This resin is used for rubber molds for jewelry or metals.

The Resin is considered to be the highest Ultra high temp resin of Phrozen3D quite strong and resistant to a very high heat of 220 degrees.

Can be used for mechanical products very close to Rock black stiff Resin .

Suitable for all printers – Sonic mini 4K , Sonic Mighty 4K , Sonic XL , Sonic Mega , Sonic Mini

Resin properties:

• Viscosity Viscosity – 160 (250C)
• Tg – 220 ° C
• Shore Hardness Hardness: 80 D
• Density Density: 1.1
• Elongation Elongation – 2%
• Tensile Stress Coefficient of Stretching: 32 MPa (Mega Pascal)
• I-Zod Impact Direct Impact Force: 8 KJ / m2

Can be printed on any printer with a wavelength of 405um.

Phrozen TR300 Gray resin Suitable for products that require mechanical strength in addition to high temp Resin.

• After printing did not leave in IPA for a long time
• Mix well before use
• Keep away from children
• If the resin has touched a hand or eyes, it is recommended to rinse with plenty of water
• If the print printing fails, it is recommended to filter with a color filter to avoid lumps.
• Wear gloves and a mask