Phrozen TR250 Gray

Phrozen TR250 Gray resin – frozen

TR250 resin from the Frozen company comes in a 1 liter package, and is used for rubber molds for jewelry that is quite strong and heat resistant.

The shade of the resin is light gray. (not the same as the picture)

Can be used for mechanical products but is not as strong Rock black stiff Resin .

Suitable for all printers – Sonic mini 4K , Sonic Mighty 4K , Sonic XL , Sonic Mega , Sonic Mini

Material properties:

• Viscosity Viscosity – 706 mPa.S (25C)
• Tg – 100 ° C
• Shore Hardness Hardness: 85 D
• Density Compression: 1.12
• Elongation Elongation – 1 %
• Tensile Stress Coefficient of Stretching: 11 MPa (Mega Pascal)
• I-Zod Impact Direct Impact Force: 3.05 KJ / m2

Can be printed on any printer with a wavelength of 405um.

Phrozen TR250 Gray resin Suitable for products that require mechanical or rubber strength for jewelry (not at temperatures above 100 degrees to higher TR300 is recommended).

• At the end of the print did not leave too much time in the IPA
• Mix well before use
• Keep away from children
• If the resin has touched a hand or eyes, it is recommended to rinse with plenty of water
• If the print printing fails, it is recommended to filter with a color filter to avoid lumps.
• Wear gloves and a mask