PETG CF – with carbon fiber

PETG enhanced with carbon fiber, gives slightly more heat resistant than normal PETG, about 10 degrees higher and better mechanical strength. It is important to use either a nozzle with a larger diameter or a reinforced steel nozzle as in the X1C and X1E printers. In printers with a held steel nozzle, you can work with a diameter of 0.4 mm, in other nozzles they will destroy quickly, but with the diameter will be higher. The print color is matte black. For the full specification of the material, click here… For the raw material guide for a consultation: Moral – 0508223065