Gray PETG

Polyethylene terephthalate glycol-modified

Gray PETG is a mechanically strong material, resistant up to about 70 degrees after printing, a little more difficult to print than PLA (more difficult to disassemble supports), more difficult to finish a product.
This material is better known for its use in the beverage bottle industry, due to its toughness and breakability properties (more than PLA or ABS) and its specific gravity is light. This filament is odorless in the work process, due to its strength and stability in the printing process PET-G can be used to build unsupported models, which it is able to handle relatively easily.
In general, since the material is stronger, dismantling supports is a little more difficult

For the specifications of the PETG gray pro material click here…

For the complete guide to all the raw materials click here

Printing temperature:
230-250 degrees to the printer head (nozzle)
Work surface temperature – 70-85 degrees
In addition, the fan must be weakened to 50% or completely turned off in order to prevent clogging of the nozzle (depending on the printer).
Usually the printing is a little slower than PLA