P CROWN resin – Senertek 3D
₪750.0 – ₪2,700.0
Designed for temporary crowns with FDA and TFDA approval .
Prominent advantages:
- Significantly better resolution than crown materials
- RX – you can take a photo and check the quality of the fit
- A less thick raw material gives a high ease in printing and prevents unnecessary gifts for the entry of material (in order to prevent air bubbles)
- Does not break in an intact jaw unlike other materials
- No special equipment is required that requires gas + heating is possible with any normal UV (recommended with heating of 60 degrees)
Fast delivery 1-5 days
› Delivery up to 3 business days (to most areas)
› Delivery up to 5 business days:
(Moshavim, kibbutzim, triangle, beyond the green line Golan Heights, Eilat and East Jerusalem)
› Receiving an SMS on the day of delivery + a call before arrival
Enlighten AA temp – Dental resin material
Designed for FDA and TFDA approved temporary crowns.
Quantity 1 liter in beige color.
Suitable for temporary crowns.
Prominent advantages:
- Very high heat resistance 238 degrees (many of the materials below 100 degrees and less suitable)
- Very high bending strength compared to competitors
- Significantly better resolution than other crown materials
- RX – you can take a photo and check the quality of the fit
- Raw material is less thick, allows for faster printing and prevents unnecessary gifts for entering material during execution (in order to prevent air bubbles)
- Does not break in an intact jaw unlike other materials
- No special equipment that requires gas is required, possible with any normal UV (better with heating or use hot water before the cure)
| Property | ISO standard | Requirement | Our results |
|---|---|---|---|
| Flexural strength | ISO10477 | ≥50 MPa | 82.35 MPa |
| Water sorption | ISO10477 | ≤40 µg/mm3 | <25 µg/mm3 |
| Water solubility | ISO10477 | ≤7.5 µg/mm3 | <1.5 µg/mm3 |
| Surface Hardness | ISO187 | ≥80 Shore D | 84.65 |
| Viscosity | N/A | N/A | ~498 cps |
| Cytotoxicity test | ISO10993-5 | Non-cytotoxic | Comply |
| Irritation test | ISO10993-10 | Cause no irritation | Comply |
| Sensitization test | ISO10993-10 | Cause no sensitivity | Comply |
| Acute systemic toxicity | ISO10993-11 | Cause no acute systemic toxicity | Comply |
| Genotoxicity test | ISO10993-3 | Cause no genotoxicity | Comply |
If a transparent bridge is needed, Enlighten DD temp .
good to know
› Rolls or Resin
Half a year from the opening date
› Printers
One-year warranty in our laboratory, excluding consumables.
› Delivery up to 3 business days (to most areas)
› Delivery up to 5 business days:
(Moshavim, kibbutzim, triangle, beyond the green line Golan Heights, Eilat and East Jerusalem)
› Receiving an SMS on the day of delivery + a call before arrival
Related products
