Skip to content 
Rolls for FDM/wire printers
A variety of types and colors, in diameters 1.75 mm or 2.85 mm, in weights 1, 5, 10 kg.
Phrozen 3D
Precise 3D liquid printers
Intended for the fields of jewelry, dental and industry.
SALE
Enlighten AA temp
Original price was: ₪1,200.0.₪1,000.0Current price is: ₪1,000.0.
Designed for temporary crowns with FDA and TFDA approval .
Prominent advantages:
- Significantly better resolution than crown materials
- RX – you can take a photo and check the quality of the fit
- A less thick raw material gives a high ease in printing and prevents unnecessary gifts for the entry of material (in order to prevent air bubbles)
- Does not break in an intact jaw unlike other materials
- No special equipment is required that requires gas + heating is possible with any normal UV (recommended with heating of 60 degrees)
Fast delivery 1-5 days
› Delivery up to 3 business days (to most areas)
› Delivery up to 5 business days:
(Moshavim, kibbutzim, triangle, beyond the green line Golan Heights, Eilat and East Jerusalem)
› Receiving an SMS on the day of delivery + a call before arrival
Description
Enlighten AA temp – Dental resin material
Designed for FDA and TFDA approved temporary crowns.
Quantity 1 liter in beige color.
Suitable for temporary crowns.
Prominent advantages:
- Very high heat resistance 238 degrees (many of the materials below 100 degrees and less suitable)
- Very high bending strength compared to competitors
- Significantly better resolution than other crown materials
- RX – you can take a photo and check the quality of the fit
- Raw material is less thick, allows for faster printing and prevents unnecessary gifts for entering material during execution (in order to prevent air bubbles)
- Does not break in an intact jaw unlike other materials
- No special equipment that requires gas is required, possible with any normal UV (better with heating or use hot water before the cure)
| Property | ISO standard | Requirement | Our results |
|---|---|---|---|
| Flexural strength | ISO10477 | ≥50 MPa | 82.35 MPa |
| Water sorption | ISO10477 | ≤40 µg/mm3 | <25 µg/mm3 |
| Water solubility | ISO10477 | ≤7.5 µg/mm3 | <1.5 µg/mm3 |
| Surface Hardness | ISO187 | ≥80 Shore D | 84.65 |
| Viscosity | N/A | N/A | ~498 cps |
| Cytotoxicity test | ISO10993-5 | Non-cytotoxic | Comply |
| Irritation test | ISO10993-10 | Cause no irritation | Comply |
| Sensitization test | ISO10993-10 | Cause no sensitivity | Comply |
| Acute systemic toxicity | ISO10993-11 | Cause no acute systemic toxicity | Comply |
| Genotoxicity test | ISO10993-3 | Cause no genotoxicity | Comply |
If a transparent bridge is needed, Enlighten DD temp .
good to know
responsibility
› Rolls or Resin
Half a year from the opening date
› Printers
One-year warranty in our laboratory, excluding consumables.
Shipments
› Delivery up to 3 business days (to most areas)
› Delivery up to 5 business days:
(Moshavim, kibbutzim, triangle, beyond the green line Golan Heights, Eilat and East Jerusalem)
› Receiving an SMS on the day of delivery + a call before arrival
Related products
SALE
Original price was: ₪600.0.₪500.0Current price is: ₪500.0.
SALE
Original price was: ₪700.0.₪550.0Current price is: ₪550.0.
SALE
Original price was: ₪600.0.₪500.0Current price is: ₪500.0.