...

CAST V1 resin – Senertek 3D

400.0700.0

Designed for temporary crowns with FDA and TFDA approval .

Prominent advantages:

  1. Significantly better resolution than crown materials
  2. RX – you can take a photo and check the quality of the fit
  3. A less thick raw material gives a high ease in printing and prevents unnecessary gifts for the entry of material (in order to prevent air bubbles)
  4. Does not break in an intact jaw unlike other materials
  5. No special equipment is required that requires gas + heating is possible with any normal UV (recommended with heating of 60 degrees)

Delivery up to 3 business days (to most areas)
Delivery up to 5 business days:
(Moshavim, kibbutzim, triangle, beyond the green line Golan Heights, Eilat and East Jerusalem)
Receiving an SMS on the day of delivery + a call before arrival

Description

Enlighten AA temp – Dental resin material

Designed for FDA and TFDA approved temporary crowns.

Quantity 1 liter in beige color.

Suitable for temporary crowns.

Prominent advantages:

  1. Very high heat resistance 238 degrees (many of the materials below 100 degrees and less suitable)
  2. Very high bending strength compared to competitors
  3. Significantly better resolution than other crown materials
  4. RX – you can take a photo and check the quality of the fit
  5. Raw material is less thick, allows for faster printing and prevents unnecessary gifts for entering material during execution (in order to prevent air bubbles)
  6. Does not break in an intact jaw unlike other materials
  7. No special equipment that requires gas is required, possible with any normal UV (better with heating or use hot water before the cure)
Property ISO standard Requirement Our results
Flexural strength ISO10477 ≥50 MPa 82.35 MPa
Water sorption ISO10477 ≤40 µg/mm3 <25 µg/mm3
Water solubility ISO10477 ≤7.5 µg/mm3 <1.5 µg/mm3
Surface Hardness ISO187 ≥80 Shore D 84.65
Viscosity N/A N/A ~498 cps
Cytotoxicity test ISO10993-5 Non-cytotoxic Comply
Irritation test ISO10993-10 Cause no irritation Comply
Sensitization test ISO10993-10 Cause no sensitivity Comply
Acute systemic toxicity ISO10993-11 Cause no acute systemic toxicity Comply
Genotoxicity test ISO10993-3 Cause no genotoxicity Comply

Link to guides.

If a transparent bridge is needed, Enlighten DD temp .

 

good to know

› Rolls or Resin

Half a year from the opening date

› Printers

One-year warranty in our laboratory, excluding consumables.

› Delivery up to 3 business days (to most areas)
› Delivery up to 5 business days:
(Moshavim, kibbutzim, triangle, beyond the green line Golan Heights, Eilat and East Jerusalem)
› Receiving an SMS on the day of delivery + a call before arrival

פתח צט
יש שאלה ?
שלום,
אפשר לעזור לך ?