Bambu lab comparison of 3 models

P1S printer

The most basic in the series, the speed is the same as the other models and the quality is not bad.
So the question arises why not buy for NIS 4500?
This printer does not have a lidar sensor that automatically detects faults such as first layer inspection, spaghetti detection, etc.
The cell sealing is a little less good than X1C
Without upgrading the Hot End to hardened steel (as in the X1C) it is not recommended to print materials with carbon fiber or glass.
Otherwise it will cause blockages in the nozzle.
Without a touch screen – that means a slightly less convenient user interface.
If your budget is low, the printer is under supervision and the printing is mainly PLA PRO, PETG and basic materials, it is right to think about the P1S option.
You can upgrade to 4 colors in advance or later.

X1C printer

Bambu lab’s best-selling model wins the Best inventions award

To watch a video comparing P1S and X1C

Meets most of the needs of the industry, undoubtedly one of the breakthrough printers in 3D printing.
If only engineering materials are needed i.e. there is almost no printing of basic materials such as PLA PRO, PETG, ABS then to consider purchasing the X1E

bambu lab X1E printer

An industrial printer is sold a lot to the defense industry since it is the only one that has a network cable connection.

X1E advantages video

In short advantages over X1C:
All other models have the option of WIFI or Micro SD.
In this model, the WIFI can be turned off at the push of a button, for some of the defense industry this is not enough and they require a sterilized Bambulab.
You can remove the entire network card, but then there is no WIFI and no network connection (if the level of security is extreme and Bambulab is required, it is sterilized from any connection to the world).
Built-in cabin heating with control – all models have a closed cabin but without control, the cabin heating is up to 60 degrees.
Critical for materials such as nylon, polycarbonate or any material that has high shrinkage.

More filters than X1C – it’s not that the X1C doesn’t have filters, but that the X1E has many more filters, which allows greater height safety for workers.
The X1E model comes in advance with AMS, meaning 4 colors and it is not possible to buy without it.
In the other models, it is possible to get a discounted model with only 1 color.

In conclusion

Everyone has a different need, for the home user most of the time P1S or X1C will be suitable.
Bamboo Love is a company that markets industrial printers that are sold a lot to the defense industry mainly X1E, the P1S and X1C models are more for light businesses or advanced home users.
If you don’t need the fact that you only use engineering materials, X1C will usually suffice, if the mechanical strength is critical and the work is only engineering materials, indeed X1E is a very good option, if the budget is low and you only work with PLA and PETG, indeed P1S will suffice.